Loading...
logo-portafolio-headers-exloc

Exloc Instruments was born from a desire to provide one convenient source for instruments, electronic devices and other products specifically designed and approved for use in hazardous classified locations involving flammable gas and dust atmospheres. We specialize in products which are outside the scope of the mainstream process control vendors. Our products carry the latest hazardous area certifications and approvals from the top notified bodies.

exloc1

Ultra iCAM501 ATEX intrinsically safe camera.

  • Intrinsically Safe, approved FM, ATEX and IECEx certified
  • Simple “point & shoot” operation
  • optical viewfinder
  • 3.1 Megapixels
  • Flash memory of 1 GB, 5000 Photos
  • Image stabilization
  • Super Bright 131 lux. Flash Sec four LEDs
  • Voice recording in .wav format
  • User firmware update
  • Compact – fits in your pocket
  • It includes silicone rubber sleeve for added grip
  • Powered by AA alkaline batteries
  • Replacement for original iCAM501 500 ICAM
exloc02

Light intrinsically safe helmet.

  • Intrinsically safe
  • Approved for Class II, Division 1, Groups A, B, C, D
  • 24 white LEDs
  • Low profile, fast inclination 45 °
  • Powered by 4x AA batteries
  • Hasta 8 Horas a plena potencia
  • Touch on / off
  • Water resistant to 20 feet / 6 meters
  • 2 years warranty
exloc03

Inspection and Inventory Report.

  • Replaces error-prone manual / visual inspections
  • RFID and barcode scanning ensures foolproof data
  • Customizable templates inspection and full software support
  • Inventory controls by physical location serialized user-defined
  • Rugged handheld scanners are intrinsically safe
  • Includes providing RFID tags, the media barcode hardware
  • The fully integrated WLAN even in hazardous areas
exloc04

Personal monitoring and Readiness.

  • Know where your people are is as they move around the plant
  • RFID scanning personal follow through bottlenecks
  • Customizable templates and complete software support
  • Check the location of staff against work orders
  • Personnel account for emergencies and evacuations
  • It includes providing RFID tags and associated hardware
  • The fully integrated WLAN even in hazardous areas
exloc05

iTAG100 Activo intrinsecamente seguro WiFi & RFID Tag.

  • Factory Mutual: clase I, II, III División 1; Grupos A-G T4 / T5 / T6
  • MSHA Aprobación Nº 23-A08006-0
  • MET Canadá: Ex ia IIB T6 … T4 Ga; Clase Zona I 0
  • ATEX y IECEx: II 1 G Ex ia IIB T4 … T6; II 2 G Ex ia IIB T4 … T6; Yo M1 Ex ia I Ma
  • Compatible with most major wireless access points
  • Robust, compact housing IP67
  • Correa, a clip and other mounting options
  • Battery life up to 4 years
  • Motion sensor for Notification “man down”
  • Call button to notify or inform emergency
exloc06

iTAG102 Activo intrinsecamente seguro  WiFi & GPS Tag.

  • intrinsically safe
  • Factory Mutual: Class I Division of the groups AD
  • Precise real-time location of high-value assets
  • Perfect for use in large open spaces with a minimum coverage of WiFi
  • Compatible with most major wireless access points
  • IP54 polycarbonate shell
  • Battery life up to 3 years
  • Motion detectors can trigger more frequent transmissions
  • Programmable for optimal performance and battery life
exloc07

iCITE100 Zone 1 Tag Excitador.

  • ATEX: II 2 G Ex mb II T4
  • Factory Mutual: Zona de Clase I 1 AEx em IIC T4 Ta 60 ° C;
  • Clase I División 2 Grupos A-D T4 Ta 40 ° C
  • Robusta, compacta carcasa IP66
  • 125 KHz de modulación ASK
  • Excite label to send or message store, on / off, etc.
  • Adjustable range up to 21 feet / 6.5 meters
  • Excitatory chain together to cover large areas or doors
exloc08

MV4.0 MobileView 4.0 Software.

  • Location and condition and collect aggregate data from any sensor, location or self-identification of the source
  • Use the data visibility of the company to revolutionize business processes
  • Tracking tens of thousands of mobile assets is in real time
  • Configure and send automated alerts based on context
  • Export reports active events and locations
  • Manage resources, assets and named areas
  • It integrates with any third-party application
  • Create industry applications as
  • Easily access data visibility of web browsers and handheld devices
exloc09

iTAG500 I.S. Passive UHF RFID Tags.

  • FM certified intrinsically safe, ATEX and IECEx standards for worldwide application
  • Plasmon uses patented technology Omni-ID
  • Excellent reading signal, on, off, and near metal and liquids
  • Read longer ranges than previously available in a passive tag – up to 115 ‘/ 35m
  • Wide range of physical possibilities of extremely robust and durable construction fixing
  • Operating Range broadband enabling global functionality
  • Through optimized 860-960 MHz EPC Gen2 protocol
exloc10

iWAP Mobile Zone 1 Portable WLAN System.

The IWAP Mobile provides the ability to quickly deply wireless infrastructure in classified hazardous remote, or part of a plant that are not covered WLAN permanent place. You can also conveniently be used to survey RF planning before installing a WLAN system.
The system uses a reliable access point installed in your choice of Extronics ‘HAZLOC wireless access point enclosures, along with one or two Extronics’ antennas HAZLOC – all housed in an antistatic bag polypropylene sturdy transport wheels.
Various types of explosion-proof (Ex) disconnect live connectors can be equipped for connection to power and Ethernet networks, or to allow multiple mobile IWAP interconnect systems for special applications. A range of cable reels and special cable assemblies are available for maximum efficiency, safety and comfort in the field.

exloc11

P-Ex OTR opis Media converters and transceivers.

  • Transparent interface between general-purpose areas and dangerous places
  • Make general-purpose optical signals supported opis
  • It can be installed in ATEX Zone 2 with a lightweight
  • Redundant power connections 10-30VDC
  • External power supply 90-250VAC available
  • Operating temperature -40 to + 176 ° F / -40 to + 80 °C
  • Types of optical connectors SC, ST and LC (depending on model)
  • Connect easily to additional devices for system expansion
  • Convert from copper to fiber optics
exloc12

P-1000 Ex Zona 1 Series Switches y convertidores de medios.

  • Transparent interface between general-purpose areas and dangerous places
  • It requires any additional protective housing
  • Aluminum housing for Zone 1 and 21 stainless steel for M2 Mining
  • Dual redundant 10-30VDC power, power line or 90-250VAC
  • Operating temperature -40 to + 176 ° F / -40 to + 80 °C
  • More than 2 million hours MTBF
  • Connect easily to additional devices

D1000 Series intrínsecamente seguros aisladores galvánicos.

High packing density

  • Innovative design with advanced surface mount components
  • Mounting modules 4 channel ultra slim 22.5 mm wide DIN rail
  • As little as 6MM per channel
  • Up to 176 I / S channels subway DIN rail
  • Models of individual channels, double or quadruple

High performance

  • Excellent signal transfer accuracy and repeatability
  • Low heat dissipation above the rank of full workload
  • Low power consumption
  • SMD manufacturing extends MTBF

Wide functionality

  • Wide variety of digital functions Analog I / S and
  • Multifunction select models are user configurable
  • The three-port isolation eliminates the problems of noise and ground loop
  • Intrinsically safe electrical isolation provides free land
  • Line fault detection for open or short in the field wiring circuits.

Great Features

  • Versions of individual channels for high integrity applications
  • DIP switch settings for easy field configuration
  • LED power indicator, signal, and the fault line
  • 35mm Regular “top hat” DIN rail mounting
  • Plug-in terminal blocks for easy wiring
  • Power range 20-30Vdc
  • Bus system optional power for simplified wiring
  • Wide range of ambient operating temperature

Approvals (check data for each specific model)

  • FM y UL para U.S.A.
  • FM-C y C-UL para Canadá
  • ATEX para CENELEC 94/9 / CE de la Comunidad Europea
  • IECEx for International Community
  • Other specific countries such as Russia, Ukraine, Korea
  • CE marking. Complies with European EMC Directives
  • DNV for ships and offshore installations
  • SIL ratings for safety related systems according to IEC 61508 and 61511

User friendly features

  • Removable connectors for easy wiring and installation
  • Removable PCB option for power bus and the DIP switch settings on the multifunction models
  • Models of microprocessors can be configured via software configurator or laptop pocket
  • LED status and fault indication Rack mounting option